【ICTC TRUSS】8 channel motor hoist power case
Today ICTC is introduct 8 channel power case , and we had introduced the 4 channel case before . Actually , the operation is the same, the 8 channel motor hoist power case not only can control more hoists, but also can control multiple hoist running at the same time , even each hoist can run one by one.
- When main power plug in 32A-plug of this power case, that red and green and yellow indicator should light up and uniform brightness. If one of the indicator is poor contact or brightness ununiform, please use a multimeter to check the power supply is lack of phase or not.2. Turn the emergency stop button 90 degrees to the right which looks like a red mushroom, then can loosen the emergency stop switch. Then turn the key switch right to ”on”. If you find out the direction of the motor hoist is different, please turn all the switch to the place of “stop”，open one switch adjust one direction, if on the place of “A” and it is opposite, then press the switch to the place of “B”, then operate the automatic reset handle. Do this till the motor hoists are in the same running direction, then can achieve on the same running direction.
3. After adjust the running direction of the motor hoist, operate the automatic reset handle up or down, then can be up or down at the same time.
4. In order to increase the capacity of motor hoist, its power case can match with our power case with same model, we just need to increase one communication cable then can control more than 8 motor hoists, even up to 32 motor hoists. (If more then 32, it can customize)
Paid special attention to: this is the special matched cable for our company, do not use in other usage, Be careful to keep it.
The EXE RISE hoist is made of Italy LITEC company and ICTC is the China agent includ Hongkong Taiwan ang Macao. The main difference of this hoist, compared to all the other brands on the market, is that the hoist is 100% made in Europe. Hoist body and mechanism are made in Italy, chain is made in Germany, brakes are made in Germany. EXE RISE hoist is the most precise hoist in the market which is test more than 20 times so it’s accuracy on a long duty cycle is one 1cm , and other brand is difficut to get this error . The EXE RISE hoist as an anti explosure brake (very safe and long lasting). Thanks to a very innovative electrical rectifier, the EXE RISE has DC brakes with the 1 to one response of an AC brake. However, thanks to the use of a DC brake, its movement is very smooth, while all the competitors’ hoist tend to be shaking and dangerous on high loads. The chain guide on EXE RISE hoists, avoids problems of chain stacking and crash. External steel chain bag support has 2 functions: chain bag slides for a comfortable position change (upside down), and steel chain bag support protects the main chain guide for a long lasting life. The screw on the covers in our EXE RISE hoist are assembled on the external part of the body, this avoids that the water enters the hoist body through the screws and also protects the main body through the external duct – please see the attached pictures.
“The power of young Chinese performing arts, escort to perform a safe and orderly development.”ICTC is looking forward to introduce more advanced, more safety equipment for the general customers friends to provide more perfect service, create more bigger and better value, let every cooperation with ICTC’s friends can have no worries about security!Looking forward to we have more cooperation in the new field, achieve a win-win situation!